Low noisy intelligent shredder, to shred plastics, waste cable and
wire, PCB, tire, wood, pipe. Capacity 1-10 tons/hour.
The machine materials by extrusion and shearing, Shear strength
with a large, low noise, intelligent control and other
characteristics. Intelligent opposite direction with the blade
rotation, When confronted with too much material, the material is
too large or the material hardness is too high, blade can
automatically rotate to the opposite direction, to effectively
protect the machine and motor.
Applications:
· Hard Disk,hard Drives,CD, disk, smart phones, U disk, core chip,
drums, PCB, Se drum scrap in large quantity
· Non-ferrous scrap metal: sections, sheet metal, casings,
aluminium rims, tubes...
· Electronic WEEE scrap: large and small appliances, IT and
telecommunications equipment, consumer electronics, electrical and
electronic tools, cooling units and refrigerators...
Double shaft shredder have been designed for a wide array of applications and
industries, suitable for shredding solid material such as E-waste,
metal, wood, plastic, scrap tires, packaging barrel. Pallets, etc.
And particularly well suited to the size reduction of bulky or
voluminous materials which could include contamination such as
metals or stones. Depending on input material and the following
process the shredded material can be used directly or go into the
next step of size reduction. It can efficient to increase the bulk
density and decrease the transportation cost. It is widely used in
industry waste recycling, medical recycling, electronic recycling,
pallet recycling, municipal solid waste recycling, plastic
recycling, tire recycling, paper making industry, etc.
Double Shaft Shredder has two rotors built into the machine that rotate at low speeds,
high torque and low noise. With the function of Siemens
microcomputer control system, it is possible to control
automatically start, stop. Automatic reverse sensors to protect the
machine against over loading and jamming.
| Model | D2012 | D1630 | D2040 | D2850 | D2860 | D2880 | D2890 | | |
| Cutting Chamber size C/D (mm) | 435×130 | 325×300 | 435×400 | 580×500 | 580×600 | 580×800 | 580×900 | | |
| Rotor Blade Diameter (mm) | 200 | 160 | 200 | 285 | 285 | 285 | 285 | | |
| Rotor Ratate Speed (r/min) | 5-10 | 10-20 | 10-20 | 10-20 | 10-21 | 10-20 | 10-20 | | |
| Rotor Blade Quantity (PCS) | 3 | 20 | 20 | 20 | 20 | 26 | 30 | | |
| Rotor Blade Thickness (mm) | 40 | 15 | 20 | 25 | 30 | 30 | 30 | | |
| Rotor Motor Power (KW) | 1.5+1.5/3 | 3+3/5.5 | 4+4/7.5 | 5.5+5.5/11 | 7.5+7.5/15 | 11+11/22 | 15+15/30 | | |
| Net Weight (kgs) | 800 | 1000 | 1200 | 1650 | 1800 | 2500 | 2500 | | |
| Model | D3280 | D32100 | D35120 | D35150 | D35150 | D40100 | D40120 | D40150 | D40180 |
| Cutting Chamber size C/D (mm) | 650×800 | 650×1000 | 680×1200 | 680×1500 | 680×1500 | 825×1000 | 825×1200 | 825×1500 | 825×1800 |
| Rotor Blade Diameter (mm) | 320 | 320 | 350 | 350 | 350 | 400 | 400 | 400 | 400 |
| Rotor Ratate Speed (r/min) | 10-15 | 10-15 | 10-15 | 10-15 | 10-15 | 10-15 | 10-15 | 10-15 | 10-15 |
| Rotor Blade Quantity (PCS) | 20 | 25 | 30 | 38 | 38 | 20 | 24 | 30 | 36 |
| Rotor Blade Thickness (mm) | 40 | 40 | 40 | 40 | 40 | 50 | 50 | 50 | 50 |
| Rotor Motor Power (KW) | 15+15/30 | 18.5+18.5/37 | 22+22 | 22+22 | 30+30 | 30+30 | 37+37 | 45+45 | 55+55 |
| Net Weight (kgs) | 4000 | 5200 | 6000 | 6500 | 7000 | 8000 | 8000 | 10000 | 12000 |
| Model | D43120 | D43150 | D43180 | D52120 | D52150 | D52180 | D62140 | D62180 | D62210 |
| Cutting Chamber size C/D (mm) | 900×1200 | 900×1500 | 900×1800 | 1100×1200 | 1100×1500 | 1100×1800 | 1300×1400 | 1300×1820 | 1300×2100 |
| Rotor Blade Diameter (mm) | 430 | 430 | 430 | 520 | 520 | 520 | 620 | 620 | 620 |
| Rotor Ratate Speed (r/min) | 10-15 | 10-15 | 10-15 | 10-15 | 10-15 | 10-15 | 10-15 | 10-15 | 10-15 |
| Rotor Blade Quantity (PCS) | 24 | 30 | 36 | 20 | 30 | 30 | 20 | 26 | 30 |
| Rotor Blade Thickness (mm) | 50 | 50 | 50 | 60 | 50 | 60 | 70 | 70 | 70 |
| Rotor Motor Power (KW) | 45+45 | 55+55 | 75+75 | 75+75 | 75+75 | 75+75 | 90+90 | 90+90 | 90+90 |
| Net Weight (kgs) | 8500 | 11000 | 13500 | 12000 | 14000 | 16000 | 15000 | 20000 | 24000 |
(1) Are you a trading company or a factory?
A: We are the 100% manufacturer ,could guarantee the price is
first-hand. we are good at design and produce shredder, crusher and
granulator which wide in the solid waste recycling treatment
business.
(2) Where is your factory located?
A: It is located in Zibo City, Shandong Province, China, which is
very convenient for you to have a visit. Welcome.
(3) How are your products?
A: Material selection and hardness survey are critical for the sake
of a quality knife and machine parts. We are firmly engaged in
knife manufacturing, and had a good command of mechanics & property
of different hot/cold die steels. Inspection on incoming materials
is furthermore well taken care of. We have optical inspection
equipment to improve the durability of our knives. We also
developed long-term cooperation with domestic iron and steel
factory, which helps us to have the more competitive, and more
importantly quality materials We are serious manufacture, and all
our knife parts must be mechanical hydraulic forging. For hardness,
our knives are uniformly heat treated and triple tempered by vacuum
furnace. Specific hardness range is set up for any specific working
condition, thus giving better wear resistance ability and longer
working life.
And we will test it before shipping and send the test video to you.
(4) What payment terms dose your company accept?
A: Generally we accept L/C and T/T.
